PE & PVC Pulling Eyes

Condux PE & PVC Pulling Eyes provide optimum gripping
power and a watertight design. The watertight
pulling eyes feature a multiple o-ring configuration, an
extremely rigid center rod to prevent bending and a
steel tapered lead cone with the same OD as the conduit.

These design features protect the outer leading edge of
the conduit and form a watertight seal. Condux PE &
PVC Pulling Eyes also feature split gripping segments with
aggressive gripping threads coupled with a steel expander
plug that better grips the full range of conduit I.Ds.
Installation of the PE & PVC Pulling Eyes simply requires
the leading eye to be tightened. The pulling eyes
come standard with attachment eyes at both ends
for connecting rope or steel lines. Pull-out strengths
generally exceed the tensile capacity of the conduit.

400 D.Drill® Directional Drilling Swivels

Designed specifically for directional drilling, the Condux
400 D.Drill Swivels prevent boring equipments’ rotational
torque from interfering with the product (cable or
conduit) being pulled. The D.Drill Swivels are greasable
and double sealed to keep contaminants out. There is a
90 day warranty on the directional drill swivels.
CAUTION: To be used for directional drilling and underground
cable installation only.
CAUTION: Condux requires the use of a calcium based
lubricant only. Other lubricants may have adverse reactions
when exposed to bentonite products. Condux requires
that the swivels be flushed with grease after each use to
purge any contaminants that may have penetrated past
the seals into the swivel while boring.